ltwguns.com

Actions Speak Louder Than Words
It is currently Tue Feb 03, 2026 6:48 am

» » »

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
John Harrison
PostPosted: Wed Jul 28, 2004 7:00 am 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Here's some pics of a warmed up Kimber Stainless Compact that was just finished. The pics are courtesy of the owner.
List 'O Work:
Novak rear sight
Reliability Tuneup
Kings 207 beavertail
Brown narrowed thumb safety
Brown smooth MSH, serrated 20 lpi and bobbed off
Front strap high cut and serrated 20 lpi
Shortened and countersunk slide stop pin
Carry bevel treatment

Image

Image

Image

Image

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
Steve Bailey
 Post subject:
PostPosted: Wed Jul 28, 2004 7:18 am 
Offline
Administrator
Administrator

Joined: Mon Feb 16, 2004 3:47 pm
Posts: 1812
Location: Tempe, Arizona
John,
I really like the Kimber Compacts. However, that one is really kewl. Great carry set up. As always great work. Thanks for the pics.

_________________
Heirloom Precision, LLC.
480-804-1911

"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr
Top
   
Reply with quote  
Witherspoon
 Post subject:
PostPosted: Wed Jul 28, 2004 8:44 am 
Offline
Senior Member

Joined: Fri May 14, 2004 6:50 pm
Posts: 431
Location: The Old Dominion
Nice one, John!!

_________________
Sic Semper Tyrannis
Top
   
Reply with quote  
smooth one
 Post subject:
PostPosted: Wed Jul 28, 2004 9:43 am 
Offline
Senior Member

Joined: Wed May 05, 2004 9:22 am
Posts: 593
Location: GA
I saw this piece in person Sunday, but without the grips in the pictures. Very slick carry gun.
Top
   
Reply with quote  
Dave Berryhill
 Post subject:
PostPosted: Wed Jul 28, 2004 11:34 am 
Offline
Members

Joined: Sat May 29, 2004 11:00 am
Posts: 145
Location: Republic of Texas
Very nice John! I like the way you carried your serrations of the front strap to the MSH. What do you think of the quality of the Kings grip safety compared to Ed Brown's?

_________________
Dave Berryhill
Berryhill Custom, LLC
Top
   
Reply with quote  
John Harrison
 Post subject:
PostPosted: Wed Jul 28, 2004 1:00 pm 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Thanks, Dave. I like what you're doing with that USMC pistol, too!
I like both BT's equally well and keep both in stock. The King's 207 and the Brown are virtually identical except for the memory grooves. If a customer isn't fixed on having a particular brand, I try to use whichever gives me the best fit. The casting line on the Kings is more apparent than on the Brown, but on most BT installs there aren't any surfaces that don't get worked over, so it's a non-issue for me. The Kings is often a better (tighter) fit between frame tangs, which I really value.

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
Dave Berryhill
 Post subject:
PostPosted: Wed Jul 28, 2004 1:36 pm 
Offline
Members

Joined: Sat May 29, 2004 11:00 am
Posts: 145
Location: Republic of Texas
Thanks John. I've been meaning to give one of the Kings a try - now I'll definitely have to.

_________________
Dave Berryhill
Berryhill Custom, LLC
Top
   
Reply with quote  
Randy Adams
 Post subject:
PostPosted: Wed Jul 28, 2004 1:37 pm 
Offline
Members

Joined: Sun May 16, 2004 5:40 pm
Posts: 35
Location: Mount Sterling,Ky
Really nice work John. I really like the serrations on the frontstrap and mainspring. Just to add a little bit about the beavertails fit inbetween the tangs i have found the CMC beavertails to fit really well in this area. I have ended up using them in place of the brown and kings several times just for that reason. Hows your experiences been with them?

Randy Adams
Fireblade Systems

_________________
RandyAdams
.http://www.firebladesystems.com
Specializing in Custom 1911s,Tactical Shotguns and Performance Glocks.
Top
   
Reply with quote  
John Harrison
 Post subject:
PostPosted: Thu Jul 29, 2004 3:56 am 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Hi Randy,
Thanks for the kind words. I've used the CMC B/T only a couple of times and had no problem with it. It's rather hard would be my only criticism. I've been doing more weld and re-cut work to get a close side to side fit on B/T's lately.

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
lefty o
 Post subject:
PostPosted: Fri Jul 30, 2004 9:41 am 
Offline
Members

Joined: Wed May 26, 2004 8:55 pm
Posts: 61
Location: mnpls,mn
Mr Harrison, can i ask what size countersink you use for the slide stop hole, and how deep do you run it?
Top
   
Reply with quote  
John Harrison
 Post subject:
PostPosted: Sat Jul 31, 2004 3:37 pm 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Hi LeftyO,

Please call me John. The countersink is 3/4" 120 degree and I take the countersink about .060"deep. I take a lot of trouble to be centered with the existing hole, but I eyeball the depth, cutting just enough to make it look right in relationship with the radius on the slide stop pin. Also, some frames limit your cut here with identification stampings that you don't want to deface.
Good Luck!

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
lefty o
 Post subject:
PostPosted: Sat Jul 31, 2004 9:13 pm 
Offline
Members

Joined: Wed May 26, 2004 8:55 pm
Posts: 61
Location: mnpls,mn
john, thank you for the info. i definately appreciate it, as little tips and tricks sometimes go a long ways when your trying to learn how to build these things.
Top
   
Reply with quote  
Ned Christiansen
 Post subject:
PostPosted: Mon Aug 02, 2004 5:09 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4415
Location: MI
Nice, Harrison-san. I like the serration taper-out, looks very art-deco. Whose grips are they?
Top
   
Reply with quote  
John Harrison
 Post subject:
PostPosted: Mon Aug 02, 2004 5:26 am 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Thanks, Ned. The customer bought the grips from Dane Burns. I didn't get to see the grips in person.

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 14 posts ] 

» » »

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited