ltwguns.com

Actions Speak Louder Than Words
It is currently Tue Mar 24, 2026 2:33 am

» » »

All times are UTC-08:00



Post new topic  Reply to topic  Page 16 of 17
  [ 503 posts ]  Go to page Previous 1 … 13 14 15 16 17 Next
  Previous topic | Next topic 
Author Message
Jason Burton
PostPosted: Tue Feb 02, 2021 9:04 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... more measuring and indications to get the barrel fit started up on the current colt Government Model project.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Wed Feb 03, 2021 8:35 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... after measuring I can machine the barrel feet on this current colt Government Model project.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Fri Feb 05, 2021 10:01 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... boring the bushing and machining/setting the headspace on the current colt Government Model project.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Feb 08, 2021 8:25 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... creating a bit more clearance in the slide stop notch of the current colt Government Model project.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Tue Feb 09, 2021 9:16 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... blending and shaping the beavertail on the current colt Government Model project.

Image

Image

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Wed Feb 10, 2021 9:42 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... machining the rear sight dovetail on the current colt Government Model project.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Fri Feb 12, 2021 9:23 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... indicating the bore so I can approximate the front sight height on the current colt Government Model project.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Tue Feb 23, 2021 8:54 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... checkering the mag-catch at 40lpi for the current colt Government Model project.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Thu Feb 25, 2021 8:16 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... the current Colt Government Model project is ready for the range. Once the gun has been tested and the sight height confirmed I'll machine the slide for ball-cuts, do the de-horn, and prep for final finish.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Mar 01, 2021 9:49 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... I had much fun testing these two last Friday. A Series 80 Colt Government Model project and a Series 80 Colt Commander Model project.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Tue Mar 02, 2021 7:55 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... lanyard loop modification on the current Colt Government Model project.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Wed Mar 03, 2021 7:18 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... rear slide serrations matched to the rear sight and a spare extractor for the current Colt Government Model project.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Mar 08, 2021 10:04 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... before and after... a freshly finished Colt Government Model project in matte black.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Mar 15, 2021 8:54 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... getting a start on a 9mm Colt Government Model.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Mar 22, 2021 9:20 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... start to finish 30lpi checkering for the 9mm Colt Government currently on my bench.

Image

Image

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Thu Mar 25, 2021 8:44 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... blended and blasted Chen GEN 2 mag-well for the 9mm Colt Government currently on my bench.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Mar 29, 2021 10:07 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... measure and cut for a bit of work on the Colt Government Model currently on the bench.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Wed Apr 28, 2021 8:22 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... squaring the breech face. The barrel needs to make solid contact with the breech face when in battery and have no fore or aft movement (end shake).

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Thu Apr 29, 2021 8:27 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4430
Location: MI
I've never seen one so wavy! Seems like by now they'd have that process down a little better. Nice job of detection / correction.
Top
   
Reply with quote  
Patrick Sweeney
PostPosted: Thu Apr 29, 2021 1:37 pm 
Offline
Senior Member

Joined: Thu Nov 04, 2004 1:15 pm
Posts: 621
Location: MI
Really, if after 110 years you can't get it right, it might be time to take some corrective action.
Top
   
Reply with quote  
Jason Burton
PostPosted: Fri Apr 30, 2021 10:16 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
All better now... radial lugs timed with the red sharpie showing solid contact on 1 and 2 while just starting to pick up #3. Barrel feet now machined as well.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Thu May 06, 2021 9:18 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... chambering and setting headspace followed by machining the rear sight dovetail.

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Tue May 18, 2021 6:55 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Photo of the day... before and after shots plus one of the mag-well on this freshly finished two-tone Colt 9mm Government Model ready to be delivered to the client.

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Aug 09, 2021 8:22 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Beavertail blending... barrel fitting... bushing fitting... setting headspace/reaming chamber... hardness testing extractor.

Image

Image

Image

Image

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Mon Aug 09, 2021 5:43 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4430
Location: MI
Jason, you Rock well :mrgreen:
Top
   
Reply with quote  
Jason Burton
PostPosted: Thu Aug 12, 2021 10:08 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
Sometimes it’s all about the checkering... here’s some views from the current Colt Government Model project in the works.

I call this first shot the “gut check”... the vertical lines have been laid out on the mag-well and now it’s time to cross them. The gut check part is not messing up the mag-well I have otherwise already fit to the gun. You can see the masking tape I use as a guide for the horizontal lines, this is 30lpi.

Image

Image


The finished checkering pattern, blended, and complete.

Image

Image


The mag-catch before and after... angled and hand-checked at 40lpi.


Image

Image

Image


The front strap... from the laid out pattern to completed points. This is 30lpi to match the mag-well shown above.


Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Patrick Sweeney
PostPosted: Thu Aug 12, 2021 1:23 pm 
Offline
Senior Member

Joined: Thu Nov 04, 2004 1:15 pm
Posts: 621
Location: MI
I still sit at my computer, staring at the screen with my jaw open, knowing that you do that by hand.
Top
   
Reply with quote  
Depmur
PostPosted: Fri Aug 13, 2021 5:31 am 
Offline
Senior Member

Joined: Wed Aug 04, 2004 2:53 pm
Posts: 258
Location: Fate, Texas
Quote:
I still sit at my computer, staring at the screen with my jaw open, knowing that you do that by hand.
I agree in addition to the checkering I look at each picture and something new always comes up. The attention to detail is amazing and the end product is phenomenal.

_________________
And this eternal resting place Is known as Fiddlers' Green.
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Fri Aug 13, 2021 11:12 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4430
Location: MI
I can only agree with you both.
Top
   
Reply with quote  
Jason Burton
PostPosted: Mon Aug 23, 2021 6:35 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1421
Location: Mesa, AZ
The current Colt Government Model project... mag-well, shooting results with 5 rounds from standing at 25 yards, and ball-cuts on the slide.

Image

Image

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 16 of 17
  [ 503 posts ]  Go to page Previous 1 … 13 14 15 16 17 Next

» » »

All times are UTC-08:00

Who is online

Users browsing this forum: Google [Bot] and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited